User interface (see figure E)

The user interface (16) is used to select the working mode and to indicate the status of the power tool.

Status indications

Battery charge indicator (user interface) (19)

Meaning/cause

Solution

Green (2 to 5 bars)

Battery charged

–

Yellow (1 bar)

Battery almost empty

Replace or charge battery soon

Red (1 bar)

Battery empty

Replace or charge battery

Temperature indicator (24)

Meaning/cause

Solution

Yellow

Operating temperature of the battery or the power tool has significantly increased, performance is reduced

Leave the power tool to cool down or replace overheated battery

Red

Operating temperature of the battery or the power tool has been exceeded, power tool switches itself off as a precautionary measure

Leave the power tool to cool down or replace overheated battery

Power tool status indicator (18)

Meaning/cause

Solution

Green

Status OK

–

Yellow

Critical temperature has been reached or rechargeable battery is almost empty

Allow the power tool to cool down, or replace or charge the battery

Red

Power tool has overheated or rechargeable battery is empty

Allow the power tool to cool down, or replace or charge the battery

Red

Impact/mode selector switch activated during operation

Turn the power tool off and on again

Motor is jammed, battery too weak

Charge the battery or use the recommended battery type

General error

  • Turn the power tool off and on again, or remove the battery and reinsert it

If the error persists:

  • Send the power tool to the after-sales service

Flashing red

  • In combination with the rapid shut-off indicator (20)

Rapid shut-off is triggered

Turn the power tool off and on again

Flashing blue

Power tool is connected to a mobile device via Bluetooth®
or
settings are being transferred

–

Smartphone status indicator (22)

Meaning/cause

Solution

white

Important information available (e.g. temperature warning)

Read the message on the smartphone

Selecting the working mode

Press the (21) button for selecting the working mode repeatedly until the working mode you require lights up.

Note: In Favorite working mode, the functions are configured via the smartphone app, while the functions are preset in Auto working mode.

Working mode (23) indicator

Functions

lights up

In Auto working mode, the power tool reaches maximum performance.

  • 100 % of the maximum speed
  • Rapid Shut-off (KickBack Control)

lights up

In Favorite working mode, the power tool can be individually configured via a smartphone app.

  • The speed can be configured in several settings for different applications:
    low/medium/high (100 % of the maximum speed) speed