Connectivity functions

System Requirements

Mobile device (tablet, smartphone)

Android 6.0 (and newer)

iOS 11 (and newer)

You will need to install the device-specific app before you can use the connectivity functions.

  • Download the app from the corresponding app store (Apple App Store, Google Play Store).
    Note: You will need to have a user account with the relevant app store to do this.

App name

iOS

Android

Bosch Toolbox

App name

Bosch BeConnected

  • Then select the MyTools or Connectivity sub-item in the app.
  • The display of your mobile device shows you all of the subsequent steps required to connect the power tool to the mobile device.

The built-in Bluetooth® Low Energy Module sends a signal at regular intervals. Depending on ambient conditions, multiple transmission intervals may be required before the power tool is detected. If the power tool is not detected, check the following:

  • Is the distance to the mobile device too great?
    Reduce the distance between the mobile device and the power tool.
  • Is the coin cell for the built-in Bluetooth® Low Energy Module weak or drained?
    Contact an authorised after-sales service centre for Bosch power tools to replace the coin cell.
  • Switch Bluetooth® off and on again on your mobile device.
    Check whether the power tool has now been detected.

In conjunction with the Bluetooth® Low Energy Module , the following connectivity functions are available for the power tool:

  • Registration and personalisation
  • Status check, output of warning messages
  • General information and settings
  • Management
  • Adjusting the Bluetooth® transfer settings for Favourite working mode