Technical Data
Thermal imaging camera | GTC 600 C |
|---|---|
Article number | 3 601 K83 501 |
Resolution of infrared sensor | 256 × 192 px |
Thermal sensitivityA) | ≤ 50 mK |
Spectral range | 8–14 μm |
Field of view (FOV)B) | 40° × 30° |
Focus distanceB) | ≥ 0.3 m |
Focus | Fixed |
Thermal image refresh rate | ≤ 9 Hz |
Surface temperature measuring rangeB) | –20 °C to +600 °C |
Surface temperature measuring accuracyB)C)D) |
|
Temperature resolution | 0.1 °C |
Display type | TFT |
Display size | 3.5" |
Display resolution | 320 × 240 px |
Integrated visual camera resolution | 640 × 480 px |
Image format | .jpg |
Audio format | .wav |
Elements saved per saving process | 1 × thermal image (screenshot), |
Max. number of images in internal image memory | 600 |
Max. number of images with a 10 s voice note each in internal image memory | 350 |
Max. altitude | 2000 m |
Pollution degree according to IEC 61010-1 | 2E) |
Relative air humidity max.B) | 90 % |
Rechargeable battery (Li-ion) | 12 V |
Rechargeable battery operating time (Li-ion)F)G) | 8 h |
System time power supply | CR2032 (3 V lithium battery) |
USB standard | 2.0 |
USB Port | USB Type-C® |
Wireless connectivity | WLAN |
Max. WLAN transmission power | < 20 mW |
WLAN operating frequency range | 2402–2480 MHz |
Weight according to EPTA-Procedure 01:2014 | 0.61–0.82 kgF) |
Dimensions (length × width × height) | 115 × 102 × 231 mm |
Protection rating (excluding rechargeable batteries, in the vertical position) | IP54 |
Recommended ambient temperature during charging | 0 °C to +35 °C |
Permitted ambient temperatures | |
| –10 °C to +50 °C |
| –20 °C to +50 °C |
| –20 °C to +70 °C |
Recommended rechargeable batteries | GBA 12 V |
Recommended chargers | GAL 12… |
- A)
In accordance with standard VDI 5585 (average)
- B)
In accordance with standard VDI 5585
- C)
At an ambient temperature of 20 to 23 °C and an emissivity of > 0.999, measuring distance: 0.3 m, operating time: > 5 min, aperture of 60 mm
- D)
Plus use-dependent deviation (e.g. reflection, distance, ambient temperature)
- E)
Only non-conductive deposits occur, whereby occasional temporary conductivity caused by condensation is expected.
- F)
Depends on battery in use
- G)
At an ambient temperature of 20–30 °C
The serial number (4) on the type plate is used to clearly identify your measuring tool.