Fitting the auxiliary handle
- Use the auxiliary handle(s). Loss of control can cause personal injury.
Always use the auxiliary handle (8). To do so, slide the auxiliary handle over the drill spindle (6) onto the spindle collar (see illustration on the graphics page). Tighten the wing bolt for adjustment of the auxiliary handle (5) in a clockwise direction.
You can swivel the auxiliary handle (8) to any angle for a safe work posture that minimises fatigue.
Turn the wing bolt for adjusting the auxiliary handle (5) anticlockwise and swivel the auxiliary handle (8) into the required position. Then retighten the wing bolt (5) by turning it clockwise.
- Before carrying out any work, make sure that the wing bolt is tightened. Loss of control can cause personal injury.